An oil resistant NBR rubber gasket is used to prevent fluid leakage, cushion mechanical contact, and protect industrial equipment. Made from nitrile butadiene rubber, it provides good resistance to mineral oils, lubricants, and compatible hydraulic fluids.
Jiuhong supplies standard and custom NBR rubber gasket products for automotive components, hydraulic machinery, pumps, valves, and other industrial applications requiring reliable sealing and cushioning performance.
An NBR rubber gasket is a compressible sealing component manufactured from nitrile butadiene rubber, a synthetic elastomer produced from acrylonitrile and butadiene.
It is commonly installed between two stationary mating surfaces. When compressed, the gasket conforms to minor surface irregularities and creates a barrier that helps prevent leakage of compatible fluids.
Unlike a conventional O-ring with a circular cross-section, a flat NBR rubber gasket may be manufactured as a washer, rectangular pad, circular ring, sheet-cut component, or custom molded profile.
Its flexibility allows it to perform both sealing and cushioning functions in suitable mechanical assemblies.
Jiuhong offers custom flat shock absorption NBR rubber gaskets for applications requiring oil resistance, dimensional customization, and mechanical cushioning.
An oil resistant NBR rubber gasket provides good compatibility with many mineral oils, lubricating oils, and petroleum-based hydraulic fluids.
This property makes nitrile rubber a practical material for mechanical equipment exposed to compatible oil-based media.
When properly compressed between suitable mating surfaces, the gasket helps reduce fluid leakage and maintain sealing contact.
Common applications include hydraulic connections, oil-containing housings, pump assemblies, and industrial machinery.
However, NBR is not compatible with every fuel, solvent, or chemical. Material selection should consider the actual fluid composition and operating temperature.
A shock absorbing NBR rubber gasket can also function as a flexible cushioning component between mechanical surfaces.
Under mechanical loading, the rubber deforms and helps reduce direct contact between adjacent components.
This can be useful in equipment where vibration, minor impact, or repeated mechanical contact may affect performance.
Typical applications include machinery housings, mechanical connections, mounting interfaces, and selected automotive components.
The cushioning effect depends on gasket thickness, hardness, compression, and the applied load.
A gasket designed primarily for fluid sealing should not automatically be treated as a dedicated vibration isolation component.
A precision NBR rubber gasket relies on controlled compression to maintain contact with mating surfaces.
Its elastic properties allow it to accommodate minor surface variations while providing sealing force.
Correct compression is essential. Insufficient compression may cause leakage, while excessive compression can increase permanent deformation and shorten service life.
For industrial applications, buyers should evaluate gasket hardness, flange design, surface finish, and operating pressure.
NBR rubber offers useful mechanical strength and resistance to wear under appropriate conditions.
These properties support its use in industrial sealing and cushioning applications.
However, gasket durability depends on the specific compound, operating loads, contact conditions, and environmental exposure.
For applications involving continuous friction or repeated sliding movement, the seal design should be evaluated separately from a conventional static gasket.
Industrial equipment requires gaskets in different geometries, thicknesses, and material grades.
Jiuhong provides standard and customized rubber sealing products manufactured according to application requirements.
Common customization options include:
Circular and rectangular rubber gaskets
Flat rubber washers and sealing rings
Custom molded rubber profiles
Different gasket thicknesses
Mounting holes and irregular shapes
Shore A hardness selection
Material formulation and color options
Production based on technical drawings or samples
These options help equipment manufacturers and maintenance buyers source components that match their installation requirements.
The following figures summarize technical specifications published for selected Jiuhong NBR rubber gasket products.
They are reference values rather than guaranteed specifications for every nitrile rubber compound.
Technical Property | Published Reference |
|---|---|
Material | Nitrile Butadiene Rubber (NBR) |
Hardness | 40–90 Shore A |
Temperature Range | -30°C to 125°C |
Tensile Strength | 10.6–21.3 MPa |
Elongation at Break | 150–672% |
Compression Set | 8–35% at 100°C for 22 hours |
Available Colors | Black and green |
Manufacturing Method | Compression molding |
Dimensional Options | Standard and customized shapes |
The temperature range and mechanical properties depend on the actual formulation and testing conditions.
For example, a compound suitable for moderate-temperature oil sealing may not be appropriate for continuous exposure near its maximum stated temperature.
Buyers should request the relevant technical data sheet when selecting gaskets for demanding industrial applications.
An automotive NBR rubber gasket can be used in suitable lubrication systems, equipment covers, mechanical housings, and oil-handling connections.
Its resistance to many petroleum-based oils makes it useful for selected automotive sealing applications.
For engine-related components, buyers should verify lubricant compatibility, temperature limits, and required gasket compression.
Hydraulic systems use sealing components to control leakage at connections, housings, and suitable mechanical interfaces.
An industrial NBR rubber gasket may be selected for static connections exposed to compatible mineral-oil hydraulic fluids.
Applications include hydraulic pump housings, valve connections, and other equipment interfaces requiring static sealing.
High-pressure hydraulic systems may require specially designed sealing elements rather than a conventional flat gasket.
A flat NBR rubber gasket can provide sealing between suitable flanges, covers, and stationary mating surfaces.
When properly compressed, it helps prevent leakage of compatible oils and other fluids.
Gasket thickness, hardness, flange loading, and surface condition are important factors in these applications.
Industrial NBR rubber gaskets are used in machinery housings, mechanical connections, and equipment assemblies.
Depending on their geometry and material properties, they can provide static sealing, cushioning, or surface protection.
For buyers seeking general-purpose oil-resistant components, Jiuhong also offers oil resistant NBR rubber gaskets for various industrial sealing requirements.
A custom molded NBR rubber gasket may be used as a cushioning pad or washer between connected components.
Its elastic deformation can help reduce direct mechanical contact and absorb a portion of applied impact energy.
For applications involving substantial vibration, repeated dynamic loading, or precise isolation requirements, buyers should verify the material's mechanical performance rather than relying on general rubber properties.
Selecting a suitable NBR rubber gasket requires matching the material, dimensions, and mechanical properties to the intended application.
Selection Factor | What Buyers Should Consider |
|---|---|
Rubber Material | Compatibility with oils, hydraulic fluids, and other working media |
Gasket Shape | Flat washer, circular ring, rectangular pad, or custom profile |
Dimensions | Inside diameter, outside diameter, thickness, and hole positions |
Hardness | Suitable Shore A hardness for compression and mechanical loading |
Temperature | Continuous and peak operating temperatures |
Pressure | Internal pressure and required gasket contact stress |
Compression | Required deformation and compression set performance |
Application | Static sealing, cushioning, or combined functions |
Manufacturing | Molded, sheet-cut, or application-specific production |
Quantity | Prototype, replacement, or bulk purchasing requirements |
Gasket thickness affects compression, sealing contact, and mechanical deformation.
A thicker gasket may accommodate some surface variations, but excessive thickness can create installation and compression problems.
The correct thickness should be determined according to the joint design and operating conditions.
Softer NBR compounds generally deform more easily under compression, while harder compounds may offer greater resistance to mechanical deformation.
However, harder rubber does not automatically provide better sealing.
The selected hardness must match the joint geometry, required compression, and operating environment.
NBR is suitable for many petroleum-based oils and lubricants, but its resistance varies with the acrylonitrile content and other formulation characteristics.
It is generally less suitable for prolonged ozone exposure and certain aggressive solvents.
For applications involving unfamiliar chemicals, buyers should request a material compatibility assessment before ordering.
The service life of an NBR rubber gasket depends on its formulation, operating temperature, fluid compatibility, compression, and mechanical loading.
There is no universal replacement interval suitable for every gasket.
A properly selected gasket may provide years of service in favorable static sealing conditions. However, prolonged heat exposure, excessive compression, incompatible chemicals, and repeated mechanical stress can shorten its lifespan.
Several factors affect durability:
Operating Temperature: Excessive heat may accelerate rubber aging and hardening.
Fluid Compatibility: Incompatible oils or chemicals may cause swelling or deterioration.
Compression Set: Permanent deformation can reduce sealing force over time.
Mechanical Loading: Repeated compression and vibration may contribute to fatigue.
Environmental Exposure: Ozone and outdoor weathering can affect NBR performance.
Installation Quality: Uneven compression or incorrect dimensions may cause leakage.
Signs of gasket deterioration include cracking, hardening, swelling, permanent deformation, and visible fluid leakage.
For critical equipment, gasket replacement intervals should follow maintenance requirements and actual operating conditions.
Different rubber materials provide different sealing advantages.
Material | Main Advantages | Typical Applications |
|---|---|---|
NBR | Good resistance to many petroleum-based oils and lubricants | Hydraulic machinery, oil-handling equipment, industrial sealing |
EPDM | Good resistance to water, ozone, and outdoor weathering | Water systems, outdoor equipment |
Silicone | Flexibility across a broad temperature range | Electrical equipment, appliances, specialized static sealing |
FKM | Good heat resistance and compatibility with many oils and selected chemicals | Automotive equipment, higher-temperature machinery |
NBR is often a practical choice for compatible oil-based applications where material cost and mechanical performance are important.
EPDM may be more suitable for outdoor water-handling equipment, while FKM may be considered for higher-temperature applications involving compatible oils.
Silicone may be selected where temperature flexibility is more important than abrasion resistance.
The correct material should always be chosen according to the working environment.
An NBR rubber gasket is used for static sealing, leakage prevention, and mechanical cushioning in suitable equipment. Common applications include hydraulic machinery, pump housings, automotive assemblies, and oil-handling systems.
Yes. NBR provides good resistance to many mineral oils, lubricants, and compatible hydraulic fluids. However, chemical compatibility depends on the nitrile formulation and the specific working medium.
An NBR rubber gasket can provide cushioning and reduce some vibration transmission when properly designed. For demanding vibration isolation applications, material stiffness, compression, frequency, and mechanical loading must be evaluated.
Jiuhong lists a reference temperature range of -30°C to 125°C for selected NBR gasket products. The actual continuous operating range depends on the rubber compound, fluid exposure, and sealing conditions.
An NBR gasket is commonly flat or specially shaped to seal mating surfaces. An NBR O-ring has a circular cross-section and is typically installed in a designed groove.
Both can provide sealing in compatible applications, but their installation geometries differ.
Yes. Jiuhong offers customized rubber sealing components based on drawings and samples. Buyers can specify dimensions, gasket shapes, hardness, material requirements, and estimated order quantities.
Industrial buyers require rubber gaskets that match the intended sealing environment, equipment dimensions, and purchasing requirements.
Jiuhong is a rubber sealing manufacturer based in Shenzhen, China, with more than 20 years of experience in the rubber sealing industry.
Its published NBR gasket product information describes compression molding, customized profiles, material hardness options, and quality inspection procedures.
The company also offers rubber components produced according to customer drawings or samples.
For buyers requiring related sealing components, Jiuhong provides custom oil resistant NBR nitrile rubber O-rings as part of its broader nitrile rubber sealing product range.
These options can support equipment manufacturers, automotive parts suppliers, industrial distributors, and maintenance businesses seeking standard or customized sealing components.
Before ordering, customers should confirm the material grade, gasket dimensions, hardness, dimensional tolerances, inspection requirements, and production quantities.
Whether you need an oil resistant NBR rubber gasket for hydraulic equipment, a flat rubber washer for industrial machinery, or a custom shock absorbing gasket for mechanical assemblies, selecting the correct material and dimensions is essential.
Browse Jiuhong's NBR Rubber Gasket products to compare available shapes, material properties, and sealing configurations.
For customized orders, provide your technical drawings, gasket dimensions, working medium, operating temperature, pressure requirements, hardness preferences, and estimated purchasing quantity to request suitable product information and quotations.