A high temperature FKM O-ring is designed for sealing applications involving heat, petroleum-based oils, fuels, and compatible chemicals. Made from fluorocarbon rubber, it provides useful thermal stability and resistance to many demanding industrial fluids.
Jiuhong supplies standard and customized FKM O-ring products for automotive systems, industrial machinery, pumps, valves, and other equipment requiring reliable sealing under suitable operating conditions.
An FKM O-ring is a circular elastomeric seal manufactured from fluorocarbon rubber. Its round cross-section forms a sealing barrier when compressed between properly designed mating surfaces.
FKM is valued for its resistance to elevated temperatures, many petroleum-based fluids, and selected chemicals. It is frequently considered when conventional NBR seals cannot meet the required combination of temperature and fluid compatibility.
FKM is a material classification, while Viton is a commercial brand name associated with certain fluoroelastomer products. Not all FKM compounds have identical properties.
An industrial FKM O-ring is commonly used in static sealing applications and may also be suitable for certain dynamic systems when the seal design and operating conditions permit.
Jiuhong offers FKM Rubber O Ring products for industrial and automotive sealing requirements.
A heat resistant FKM O-ring can maintain useful sealing properties at temperatures that may exceed the operating limits of many general-purpose nitrile rubber compounds.
Jiuhong lists a reference temperature range of -20°C to 250°C for a selected FKM O-ring product.
This makes suitable FKM grades useful for automotive engines, transmission equipment, industrial machinery, and systems exposed to elevated temperatures.
However, continuous operating limits depend on the exact formulation, fluid exposure, compression, and service duration.
An oil resistant FKM O-ring offers good compatibility with many mineral oils, lubricants, petroleum-based hydraulic fluids, and fuels.
Its resistance to swelling in suitable oil environments helps maintain sealing dimensions and compression performance.
Typical applications include:
Automotive lubrication systems
Gearboxes and transmission equipment
Fuel-handling components
Hydraulic pumps and valves
Industrial oil-processing machinery
Fuel compatibility should be verified against the exact formulation, particularly where fuels contain alcohols or aggressive additives.
A chemical resistant FKM O-ring can be used with many hydrocarbons, oils, and selected industrial chemicals.
Fluorocarbon rubber is frequently considered for chemical-processing equipment, industrial pumps, and fluid-handling systems where material compatibility is important.
However, FKM is not resistant to every chemical.
Some ketones, amines, esters, and other aggressive media may be unsuitable for conventional FKM compounds.
Chemical compatibility should always be checked using the exact fluid composition, concentration, temperature, and selected rubber grade.
A precision FKM O-ring creates a sealing barrier through controlled elastomer compression.
When installed in a properly designed groove, the seal maintains contact with the mating surfaces and helps prevent fluid or gas leakage.
FKM compounds can offer useful resistance to compression set at elevated temperatures.
The effectiveness of the seal still depends on groove dimensions, hardness, compression, pressure, and operating conditions.
Different industrial systems require different O-ring sizes, material hardness levels, and sealing configurations.
Jiuhong provides standard and non-standard rubber O-ring products with customization options.
Common requirements include:
Inside diameter and cross-sectional diameter
Metric and inch-size dimensions
AS568 and JIS B2401 dimensional standards
Shore A hardness
Rubber compound selection
Color and surface requirements
Customized dimensions based on drawings
Packaging and purchasing quantities
For non-standard equipment, buyers can provide technical drawings or physical samples to confirm dimensional requirements.
The following figures summarize technical information published for Jiuhong's Heat Wear Resistant FKM Fluoro Rubber O Ring. These values apply to the referenced product information and should not be treated as guaranteed specifications for every FKM grade.
Technical Property | Published Reference |
|---|---|
Material | Fluorocarbon Rubber (FKM) |
Hardness | 40–90 Shore A |
Reference Temperature Range | -20°C to 250°C |
Tensile Strength | 9.3–16.2 MPa |
Elongation at Break | 135–492% |
Compression Set | 11–22% at 200°C for 22 hours |
Available Colors | Black, green, and brown |
Manufacturing Method | Compression molding with secondary vulcanization |
Dimensional Options | Standard and customized sizes |
These values depend on material formulation and testing conditions. Buyers should request the relevant technical data sheet before confirming a critical sealing application.
For additional product specifications, review Jiuhong's Heat Wear Resistant FKM Fluoro Rubber O Ring.
An automotive FKM O-ring is commonly used in selected engine assemblies, fuel-handling components, transmissions, and lubrication systems.
Its resistance to elevated temperatures and many petroleum-based fluids makes it useful in appropriate automotive sealing environments.
For automotive applications, buyers should consider continuous operating temperature, fuel composition, pressure, and dimensional requirements.
Industrial FKM O-ring products are used in suitable pump housings, valve assemblies, and fluid connections.
They help reduce leakage of compatible oils and chemicals between correctly designed mating surfaces.
For high-pressure applications, seal hardness and extrusion clearance require particular attention.
A chemical resistant FKM O-ring may be suitable for selected chemical-processing systems, pipelines, and mechanical assemblies.
Its fluid compatibility makes it useful where ordinary elastomers may experience excessive swelling or deterioration.
However, chemical-processing applications require careful compatibility assessment because certain chemicals can rapidly damage conventional FKM compounds.
FKM sealing rings can be used in selected gearbox housings, lubrication circuits, and industrial machinery.
They may provide static or secondary sealing where operating temperatures and lubricants are compatible with the selected material.
Applications involving continuous friction or shaft movement require an appropriate dynamic sealing design.
An oil resistant FKM O-ring can support suitable sealing applications in petroleum-handling equipment, valves, and pumps.
Material selection should consider the complete fluid composition, including any solvents, additives, or other chemicals.
Selecting a suitable FKM O-ring requires evaluating both material compatibility and mechanical sealing requirements.
Selection Factor | What Buyers Should Check |
|---|---|
Inside Diameter | Match the required installation dimensions |
Cross-Section | Select the correct thickness for groove compression |
Rubber Hardness | Choose an appropriate Shore A hardness |
Temperature | Confirm continuous and peak operating temperatures |
Fluid Compatibility | Check oils, fuels, solvents, and chemical additives |
Operating Pressure | Evaluate sealing pressure and extrusion clearance |
Application Type | Static or appropriately designed dynamic sealing |
Dimensional Standard | AS568, JIS B2401, metric, or custom dimensions |
Material Grade | Verify the exact FKM formulation and technical properties |
For critical applications, buyers should also review compression set, low-temperature flexibility, and chemical compatibility.
A seal with the correct dimensions may still fail prematurely if the material is unsuitable for the operating fluid or temperature.
The service life of an FKM O-ring depends on material formulation, temperature, pressure, fluid exposure, and installation conditions.
There is no universal replacement interval for every FKM sealing application.
A properly selected FKM O-ring may provide years of service in favorable static applications. However, continuous high temperatures, incompatible chemicals, excessive compression, or mechanical wear can reduce its lifespan.
Important factors include:
Temperature: Prolonged exposure to excessive heat can accelerate elastomer aging.
Chemical Compatibility: Unsuitable fluids may cause swelling, hardening, or deterioration.
Compression Set: Permanent deformation may reduce sealing force.
Pressure: High pressure and excessive extrusion clearance can cause seal damage.
Installation: Twisting, overstretching, or sharp edges may cause premature failure.
Mechanical Movement: Dynamic contact can introduce friction and wear.
Routine inspection should focus on leakage, cracking, deformation, swelling, and changes in material hardness.
Replacement schedules should follow the actual equipment operating conditions and maintenance requirements.
Different rubber materials offer different sealing advantages.
Material | Main Advantages | Typical Applications |
|---|---|---|
FKM | High-temperature resistance and compatibility with many oils, fuels, and selected chemicals | Automotive systems, industrial machinery, oil-handling equipment |
NBR | Good resistance to many mineral oils with economical material cost | Hydraulic equipment, general machinery |
EPDM | Resistance to water, ozone, and weathering | Water systems, outdoor equipment |
Silicone | Flexibility across a broad temperature range | Electrical equipment, appliances, specialized static sealing |
FKM is often considered when higher-temperature oil resistance is required.
However, it generally costs more than NBR and may offer less flexibility at low temperatures than specially formulated low-temperature elastomers.
EPDM may be preferable for compatible water-based applications, while Silicone may be selected where low-temperature flexibility is particularly important.
The final material choice should be based on the actual operating environment rather than a single performance characteristic.
Industrial buyers require sealing components that match their equipment, operating fluids, and dimensional requirements.
Jiuhong supplies standard and customized FKM O-ring products for industrial and automotive applications.
Its published product information describes compression molding, secondary vulcanization, different hardness options, and standard or non-standard dimensions.
The company also offers custom rubber sealing components based on customer drawings and samples.
These options support equipment manufacturers, maintenance businesses, industrial distributors, and purchasers requiring specialized sealing components.
Before ordering, customers should confirm the FKM grade, dimensions, operating temperature, chemical compatibility, inspection requirements, and purchasing quantities.
Whether you need a high temperature FKM O-ring for automotive machinery, an oil resistant FKM O-ring for industrial equipment, or a custom fluorocarbon rubber seal for a specialized fluid system, selecting the right material and dimensions is essential.
Browse Jiuhong's FKM O-ring products to compare available materials, hardness levels, and dimensional configurations.
For customized orders, provide your technical drawings, inside diameter, cross-section, working medium, operating temperature, pressure requirements, and estimated quantity to request suitable product information and quotations.