A high temperature FKM rubber gasket is designed for sealing applications involving elevated temperatures, petroleum-based oils, fuels, and compatible chemicals. Made from fluorocarbon rubber, it provides useful thermal stability and chemical resistance for demanding industrial environments.
Jiuhong supplies standard and custom FKM rubber gasket products for automotive components, industrial machinery, pumps, valves, and other equipment requiring reliable sealing under suitable operating conditions.
An FKM rubber gasket is a compressible sealing component manufactured from fluorocarbon elastomer. FKM refers to a family of fluoroelastomers commonly selected for applications requiring resistance to heat, many oils, and selected chemicals.
When installed between correctly designed mating surfaces, the gasket forms a sealing barrier through controlled compression. Its elasticity allows it to accommodate minor surface irregularities and reduce fluid or gas leakage.
Unlike a conventional O-ring, a flat FKM rubber gasket may be manufactured as a washer, circular ring, rectangular pad, sheet-cut component, or custom molded profile.
FKM is a material classification, while Viton is a commercial brand name used for certain fluoroelastomer products. The exact compound should be confirmed before purchasing.
Jiuhong offers high temperature oil resistant FKM rubber gaskets for industrial sealing applications involving compatible oils and elevated temperatures.
A heat resistant FKM rubber gasket is commonly selected for equipment operating at higher temperatures than those typically recommended for general-purpose nitrile rubber.
The fluorocarbon structure provides useful thermal stability and resistance to heat-related degradation.
Jiuhong lists a reference temperature range of -20°C to 250°C for selected FKM gasket products. However, this range should not be interpreted as a universal continuous operating rating.
Actual temperature capability depends on the compound formulation, exposure duration, working medium, and compression conditions.
High-temperature FKM gaskets are often considered for automotive engines, transmissions, industrial machinery, and suitable thermal equipment.
An oil resistant FKM rubber gasket offers good compatibility with many petroleum-based oils, lubricants, fuels, and selected hydraulic fluids.
This property makes FKM useful in equipment where maintaining sealing performance during prolonged oil exposure is important.
Typical applications include:
Automotive engine and transmission components
Industrial lubrication systems
Gearboxes and mechanical housings
Fuel-handling equipment
Pumps and valves containing compatible fluids
However, fuel compatibility depends on the exact FKM compound and fuel formulation. Alcohol-containing fuels and aggressive additives require additional evaluation.
A chemical resistant FKM rubber gasket may provide effective sealing in equipment exposed to compatible hydrocarbons, oils, and selected industrial chemicals.
Its chemical resistance makes it useful in petroleum processing, chemical handling, and industrial fluid systems.
However, FKM is not resistant to every chemical.
Conventional FKM compounds may be unsuitable for certain ketones, amines, esters, and other aggressive media.
For chemical sealing applications, buyers should verify compatibility using the exact fluid composition, concentration, temperature, and selected elastomer grade.
A precision FKM rubber gasket creates sealing contact when compressed between two mating surfaces.
The applied compression helps the gasket fill minor surface irregularities and limit unwanted fluid movement.
FKM compounds can provide useful compression set resistance under suitable elevated-temperature conditions.
However, the final sealing performance depends on gasket thickness, hardness, surface finish, flange loading, and operating pressure.
Insufficient compression may lead to leakage, while excessive compression can cause permanent deformation or premature damage.
Industrial applications often require sealing components with non-standard dimensions or installation profiles.
Jiuhong provides standard and customized FKM rubber gasket options for different equipment requirements.
Common customization considerations include:
Flat rubber washers and circular gaskets
Rectangular and irregular gasket profiles
Custom molded sealing components
Inside and outside diameters
Gasket thickness and mounting holes
Shore A hardness
Rubber compound formulation
Color and surface requirements
Production based on drawings or samples
These options can help equipment manufacturers source sealing components suitable for their assembly designs.
The following reference specifications are published for selected Jiuhong FKM rubber gasket products. Actual values depend on the specific compound and testing conditions.
Technical Property | Published Reference |
|---|---|
Material | Fluorocarbon Rubber (FKM) |
Hardness | 40–90 Shore A |
Reference Temperature Range | -20°C to 250°C |
Tensile Strength | 9.3–16.2 MPa |
Elongation at Break | 135–492% |
Compression Set | 11–22% at 200°C for 22 hours |
Available Colors | Black, green, and brown |
Manufacturing Method | Rubber molding |
Main Characteristics | Heat resistance, oil resistance, selected chemical resistance |
Dimensional Options | Standard and customized profiles |
These values are product reference data rather than guaranteed properties for every FKM formulation.
For demanding sealing applications, buyers should request a technical data sheet and confirm temperature limits, chemical resistance, compression set, and dimensional tolerances.
An automotive FKM rubber gasket can be used in selected engine assemblies, transmissions, and oil-handling connections.
Its resistance to elevated temperatures and many compatible lubricants makes it useful in demanding automotive sealing environments.
For transmission sealing applications, buyers should consider the operating temperature, transmission fluid composition, pressure, and installation dimensions.
Jiuhong supplies FKM rubber gaskets for automotive transmission sealing, offering an application-specific option for buyers seeking fluorocarbon rubber sealing components.
Industrial FKM rubber gaskets may be used between suitable pump housings, valve connections, and stationary mating surfaces.
They help reduce leakage when the gasket material is compatible with the working fluid.
For pressurized systems, gasket thickness, compression, flange loading, and material properties must be evaluated together.
An oil resistant FKM rubber gasket is frequently considered for compatible petroleum products, lubricants, and fuel-handling applications.
Its resistance to many hydrocarbons can help maintain sealing performance where some conventional elastomers may experience excessive swelling.
However, the exact fuel or oil formulation must be checked before installation.
Chemical-processing systems may require rubber gaskets that withstand elevated temperatures and exposure to selected chemicals.
FKM can be suitable for certain industrial chemical applications, provided the selected compound is compatible with the working medium.
For unfamiliar or aggressive chemicals, buyers should request material compatibility testing or engineering verification.
FKM rubber gaskets may be used in gearbox covers, lubrication systems, and machinery housings.
They can provide static sealing between connected components and help prevent leakage of compatible lubricants.
Their suitability depends on temperature, gasket compression, operating fluid, and mechanical loading.
Certain FKM compounds are used in specialized equipment where heat and fluid resistance are important.
However, aerospace and safety-critical applications require specific material qualifications, traceability, and testing.
A general industrial FKM gasket should not be assumed suitable for aerospace use without the required technical validation.
Selecting a suitable FKM rubber gasket requires evaluating its material properties, dimensions, and operating environment.
Selection Factor | What Buyers Should Consider |
|---|---|
Rubber Compound | Exact FKM formulation and chemical compatibility |
Gasket Shape | Flat washer, circular ring, rectangular pad, or custom profile |
Dimensions | Inside diameter, outside diameter, thickness, and hole positions |
Hardness | Suitable Shore A hardness for the required compression |
Temperature | Continuous and peak operating temperatures |
Working Medium | Oils, fuels, lubricants, solvents, or other chemicals |
Pressure | Internal pressure and required gasket contact stress |
Compression | Required deformation and compression set performance |
Surface Condition | Flatness, finish, and condition of the mating surfaces |
Manufacturing | Standard replacement or customized gasket production |
Gasket thickness influences compression and sealing contact.
A thicker gasket may accommodate certain surface irregularities, but excessive thickness can affect assembly stability and sealing performance.
The correct thickness should be determined according to the joint geometry and mechanical loading.
Softer FKM compounds generally deform more easily under compression, while harder compounds may offer greater resistance to mechanical deformation.
However, higher hardness does not automatically provide better sealing.
The appropriate hardness depends on pressure, flange design, compression, and operating conditions.
FKM provides good resistance to many oils and selected chemicals, but chemical resistance differs between formulations.
Buyers should confirm compatibility with the exact fluid, concentration, temperature, and exposure duration.
For aggressive chemical environments, material testing may be necessary before production.
The service life of an FKM rubber gasket depends on the material formulation, temperature, chemical exposure, compression, and operating conditions.
There is no universal replacement interval suitable for every FKM gasket.
A properly selected gasket may provide years of service in favorable static sealing applications. However, continuous high temperatures, incompatible chemicals, excessive compression, and mechanical damage can shorten its useful life.
Important factors include:
Operating Temperature: Prolonged excessive heat may accelerate material degradation.
Chemical Compatibility: Incompatible fluids can cause swelling, hardening, or deterioration.
Compression Set: Permanent deformation can reduce gasket sealing force.
Mechanical Loading: Repeated compression and vibration may contribute to fatigue.
Installation Quality: Incorrect dimensions or uneven compression can cause leakage.
Surface Condition: Damaged or irregular mating surfaces may affect sealing contact.
Common signs of deterioration include cracking, hardening, swelling, permanent deformation, and fluid leakage.
Replacement schedules should follow equipment maintenance requirements and actual operating conditions.
Different rubber materials offer different sealing advantages.
Material | Main Advantages | Typical Applications |
|---|---|---|
FKM | Heat resistance and compatibility with many oils, fuels, and selected chemicals | Automotive transmissions, industrial machinery, oil-handling equipment |
NBR | Good resistance to many mineral oils and lubricants | Hydraulic equipment, general industrial sealing |
EPDM | Good resistance to water, ozone, and weathering | Water systems, outdoor equipment |
Silicone | Flexibility across a broad temperature range | Appliances, electronics, specialized static sealing |
FKM is often considered when an application requires higher-temperature resistance together with compatibility with selected oils or fuels.
NBR may provide a more economical solution for moderate-temperature oil sealing.
EPDM may be better suited to compatible water-based and outdoor applications, while Silicone offers useful temperature flexibility for certain static sealing requirements.
The final material selection should be based on actual operating conditions.
An FKM rubber gasket is used for static sealing in suitable automotive, industrial, petroleum, and chemical-processing equipment. It is commonly selected for applications involving heat, oils, fuels, and compatible chemicals.
Yes. FKM generally provides good resistance to many petroleum-based oils, lubricants, and selected fuels. However, compatibility depends on the specific compound and working fluid.
Jiuhong lists a reference temperature range of -20°C to 250°C for selected FKM gasket products. Continuous operating limits depend on the formulation, compression, working medium, and exposure duration.
FKM provides resistance to many hydrocarbons and selected industrial chemicals. However, conventional formulations may be unsuitable for certain ketones, amines, esters, and other aggressive chemicals.
FKM generally offers better resistance to elevated temperatures and certain aggressive fluids, while NBR provides good oil resistance at a lower typical material cost. The best choice depends on operating conditions.
A correctly designed FKM gasket can help prevent leakage of compatible fuels. The exact fuel composition, gasket compression, pressure, and material formulation must be verified before use.
Yes. Jiuhong offers customized rubber sealing products based on technical drawings and samples. Buyers can specify gasket dimensions, shapes, hardness, material requirements, and purchasing quantities.
Industrial buyers need sealing components that meet dimensional, material, and operating requirements.
Jiuhong is a rubber sealing manufacturer based in Shenzhen, China, supplying FKM, NBR, EPDM, Silicone, and other rubber sealing components.
Its published FKM gasket product information includes molded manufacturing, multiple hardness options, different colors, and standard or customized dimensions.
Jiuhong also describes custom tooling, production inspection, and OEM/ODM support for customers requiring non-standard rubber components.
For equipment manufacturers, automotive parts suppliers, industrial distributors, and maintenance businesses, these services can support both standard replacement sourcing and customized sealing projects.
When evaluating suppliers, buyers should consider:
Material grade and chemical compatibility
Dimensional accuracy and gasket thickness
Available molding and customization options
Product inspection requirements
Technical drawings and sample approval
Minimum order quantities
Production schedules and delivery requirements
Before ordering, customers should confirm the final FKM formulation, operating conditions, inspection requirements, and technical specifications.
Whether you need a high temperature FKM rubber gasket for industrial machinery, an oil resistant gasket for automotive transmissions, or a custom fluorocarbon rubber gasket for chemical-processing equipment, choosing the correct material and dimensions is essential.
Browse Jiuhong's FKM Rubber Gasket products to compare available configurations, material options, and sealing applications.
For customized orders, provide your technical drawings, gasket dimensions, working medium, operating temperature, pressure requirements, hardness preferences, and estimated purchasing quantity to request suitable product information and quotations.