Worker inspecting a black rubber sealing ring with a handheld measuring tool
You are here: Home » Products » Rubber O-ring » NBR O-ring

Product Category

Contact Us

NBR O-ring

NBR O-ring: Oil-Resistant Sealing Solutions for Industrial Applications

An oil resistant NBR O-ring is widely used in hydraulic equipment, automotive systems, pumps, valves, and industrial machinery. Made from nitrile butadiene rubber, it provides reliable sealing performance in many applications involving mineral oils, lubricants, and compatible hydraulic fluids.

Jiuhong supplies standard and custom NBR O-ring products in different sizes, hardness levels, and configurations to meet industrial sealing and equipment maintenance requirements.

What Is an NBR O-ring?

An NBR O-ring is a circular sealing component made from nitrile butadiene rubber. Its round cross-section allows it to form a seal when compressed between properly designed mating surfaces.

NBR is commonly selected because of its resistance to petroleum-based oils, mechanical wear, and compression under suitable operating conditions.

Compared with some specialty elastomers, nitrile rubber offers a practical balance between material cost and sealing performance.

A standard NBR O-ring is often used for static sealing, while appropriately designed seals may also be used in certain dynamic applications.

For customers requiring standard dimensions, Jiuhong offers Standard Metric and Inch Size NBR Rubber O-rings for different industrial sealing applications.

Key Features of NBR O-ring Products

1. Excellent Oil Resistance

An oil resistant NBR O-ring is commonly used in equipment exposed to mineral oils, lubricating oils, and compatible hydraulic fluids.

Its material properties help maintain sealing performance where the elastomer is exposed to suitable petroleum-based media.

Typical applications include hydraulic valves, pumps, lubrication systems, and mechanical connections.

However, NBR is not compatible with every oil, fuel additive, or chemical. Fluid compatibility should be verified before selection.

2. Good Elasticity and Compression Performance

A precision NBR O-ring creates a sealing barrier through controlled compression.

When installed correctly, the rubber deforms to fill the sealing space and maintain contact with the mating surfaces.

The effectiveness of this seal depends on groove design, compression ratio, hardness, and operating pressure.

Excessive compression can accelerate permanent deformation, while insufficient compression may result in leakage.

3. Multiple Sizes and Hardness Options

Industrial sealing applications require different O-ring dimensions and material hardness levels.

Jiuhong offers NBR O-ring products in standard and non-standard sizes, including options associated with AS568 and JIS B2401 dimensional standards.

Common customization requirements include:

  • Inside diameter and cross-sectional diameter

  • Standard or non-standard dimensions

  • Shore A hardness

  • Material formulation

  • Color and surface requirements

  • Packaging and order quantity

For specialized applications, buyers can provide drawings, samples, or detailed dimensional requirements.

4. Cost-Effective Industrial Sealing

NBR is widely used in general industrial sealing because it combines useful mechanical properties with relatively economical material costs.

An industrial NBR O-ring has a simple construction and can often be installed without complex sealing assemblies.

When the seal is correctly specified, it can help reduce leakage, simplify equipment maintenance, and support replacement part availability.

NBR O-ring Technical Properties

The following values summarize specifications published for selected Jiuhong NBR O-ring products. They are reference ranges rather than guaranteed values for every compound.

Technical Property

Published Reference Range

Material

Nitrile Butadiene Rubber (NBR)

Hardness

30–90 Shore A

Temperature Range

-30°C to 125°C

Tensile Strength

10.6–21.3 MPa

Elongation at Break

150–672%

Available Colors

Black, green, and selected custom options

Dimensional Standards

AS568, JIS B2401, and custom sizes

Actual specifications depend on the selected compound, production requirements, and applicable testing methods.

For detailed material and dimensional information, buyers can review Jiuhong's NBR Rubber O Ring product.

Applications of NBR O-ring Seals

Hydraulic and Pneumatic Equipment

A hydraulic NBR O-ring is commonly used in suitable sealing connections within hydraulic pumps, valves, fittings, and cylinders.

NBR is particularly useful in systems containing compatible mineral-oil-based hydraulic fluids.

Correct material hardness and groove design are essential for equipment operating under pressure.

Automotive Sealing Systems

Automotive NBR O-ring products are used in selected lubrication systems, mechanical assemblies, and fluid-handling components.

Their resistance to many petroleum-based oils makes them suitable for certain engine and transmission-related applications.

However, fuel compatibility and operating temperature must be checked against the exact NBR compound.

Pumps, Valves and Industrial Machinery

Industrial NBR O-ring products can be used in pumps, compressors, valve housings, and mechanical equipment.

They help provide sealing between components and reduce leakage of compatible fluids.

For equipment involving repeated movement, the sealing design should also consider friction, lubrication, and wear.

Equipment Maintenance and Replacement

NBR O-rings are commonly stocked as replacement components by maintenance workshops, equipment manufacturers, and industrial distributors.

Standard-size assortments can help maintenance teams find suitable replacement seals more efficiently.

Jiuhong also supplies NBR Rubber O-ring Kit Assortments for organized sealing maintenance and repair applications.

How to Choose the Right NBR O-ring

Selecting the correct NBR O-ring requires evaluating its dimensions, material properties, and operating conditions.

Selection Factor

What Buyers Should Check

Inside Diameter

Match the required sealing dimensions

Cross-Section

Select the correct thickness for the groove

Hardness

Choose suitable Shore A hardness for the application

Fluid Compatibility

Confirm resistance to oils, fuels, and hydraulic fluids

Temperature

Check continuous and peak operating temperatures

Pressure

Evaluate operating pressure and extrusion clearance

Application Type

Identify static or dynamic sealing conditions

Size Standard

AS568, JIS B2401, metric, or custom dimensions

For custom applications, drawings and technical samples can help confirm the correct O-ring dimensions.

Customers should also specify whether the seal will be used in a static joint, hydraulic connection, or moving assembly.

How Long Will an NBR O-ring Last?

The service life of an NBR O-ring depends on the working environment, rubber formulation, operating pressure, and installation conditions.

There is no universal replacement interval for every application.

An NBR O-ring may provide years of service under suitable static sealing conditions, but exposure to excessive heat, incompatible fluids, or repeated mechanical movement can shorten its lifespan.

Several factors affect long-term performance:

  • Operating Temperature: High temperatures can accelerate rubber aging and hardening.

  • Fluid Compatibility: Unsuitable chemicals may cause swelling, cracking, or loss of elasticity.

  • Compression Set: Permanent deformation can reduce sealing force over time.

  • Pressure Conditions: High pressure and excessive extrusion clearance may damage the seal.

  • Installation Quality: Twisting, overstretching, or sharp edges may cause premature failure.

  • Mechanical Movement: Dynamic applications may introduce friction and wear.

Regular inspection helps identify leakage, visible cracks, hardening, swelling, or permanent deformation.

Replacement intervals should be based on operating conditions and equipment maintenance requirements.

NBR O-ring vs Other Rubber Materials

NBR is suitable for many oil-related applications, but other elastomers may provide better performance under different conditions.

Material

Main Advantage

Selection Consideration

NBR

Resistance to many petroleum-based oils and lubricants

General machinery and compatible hydraulic systems

EPDM

Water, ozone, and weather resistance

Water-handling and outdoor applications

Silicone

Flexibility over a broad temperature range

Temperature-sensitive applications

FKM

Heat resistance and compatibility with many oils and selected chemicals

Higher-temperature and demanding fluid applications

NBR is generally not recommended for continuous exposure to ozone, certain polar solvents, or applications beyond its validated temperature range.

For demanding environments, material selection should be based on the specific fluid, temperature, and sealing design rather than material name alone.

Why Choose Jiuhong NBR O-ring Products?

Industrial buyers need sealing components with suitable material properties, accurate dimensions, and consistent production quality.

Jiuhong offers standard and customized NBR O-ring products for machinery, automotive equipment, hydraulic systems, and industrial maintenance.

Its published product information includes multiple dimensional standards, hardness options, and non-standard tooling capabilities.

The company also describes molded production, secondary vulcanization, and inspection procedures for selected NBR O-ring products.

For equipment manufacturers, industrial distributors, and maintenance businesses, these product options can support both standard replacement needs and customized sealing requirements.

Buyers should confirm final specifications, inspection requirements, material grades, and purchasing quantities before placing an order.

Explore NBR O-ring Products for Your Application

Whether you need an oil resistant NBR O-ring for hydraulic equipment, a standard sealing ring for industrial machinery, or a custom nitrile rubber seal for specialized applications, choosing the correct dimensions and material properties is essential.

Browse Jiuhong's NBR O-ring products to compare available sizes, hardness levels, and sealing configurations.

For customized orders, provide your technical drawings, dimensions, working medium, operating temperature, pressure requirements, and estimated order quantity to request suitable product information and quotations.

WhatsApp
+8618124569542
Call Us
+86-755-89459326
+86-18124569542
Address:
No.4, Shenlong West Lane, Pingshan, Shenzhen, Guangdong, 518122, China

Quick Links

Product Category

Copyright 2026 Shenzhen Jiuhong Century Seal Technology Co., Ltd. All Rights Reserved    Sitemap I Privacy Policy